1, in the installation of surface and accurate positioning LCD TV is installed, you must ensure the accuracy and fixed the rack part of the mounting surface.
2, the average LCD TV, thermal design in the back of the grid is usually the back or side, so up and down back of the TV and all four sides need a ventilation space between the wall and the wall TV for at least a distance of about 15 cm.
3, the television variety of interface basically arranged in the back, all data lines can not resist bending over the wall, it will be very easy to impairment.
4, the installation process to be careful when moving the machine to gently, and bedding material should be prepared to prevent scratching the display.
5, in accordance with the requirements of rack installation instructions, follow the steps to install it.
6, if the display and speakers, mounting bracket with connectors, about and pay attention to distinguish between positive and negative.
7, For connecting speaker cable, speaker cable should be noted that the positive and negative polarity, to prevent reverse left and right channel sound.
8, the screen hangs, the required level of tape measure, screws to adjust the LCD TV display is perfect rack in a horizontal position, flat-panel TV installation of machine translation error of the location should be less than 1cm, left and right tilt error is less than 1 degree.